Brand High Quality Clock Spring Contact Assy 93490G3130 for Hyundai Kona Kia Morning
The high-quality Clock Spring Contact Assy 93490G3130 produced in
Beijing, China is an important component in automobiles. It is
mainly used to maintain various wire connections on the steering
wheel, such as airbag wires, horn wires, etc., when the steering
wheel is turned, ensuring that these functions can still work
normally when the steering wheel is turned. This component is
installed on the steering column below the steering wheel.
If you are looking for a supplier or purchasing channel for this
component, it is recommended that you consult a local automotive
parts dealer or online retailer to ensure that you receive
high-quality products that meet the requirements of your vehicle
model. Meanwhile, ensure to follow the correct operating procedures
and safety guidelines when installing or replacing such components.
OEM#93490G3130 93490-G3130: An Original Equipment Manufacturer
(OEM) is a supplier that produces a component or system for an
automobile manufacturer.An OEM product usually implies that it is
of the same quality, specifications, and performance as the
component that was originally fitted to the automobile at the time
of manufacture.
Product description:
This is a brand new unopened car steering wheel clock spring
component produced in Beijing, China OEM # 93490G3130 93490-G3130
The Clock Spring Sensor for KIA Hyundai and more models.
Trade Name
| Clock Spring Contact Assy |
OEM Number
| 93490G3130 93490-G3130 |
Warranty | 12 Months |
Quality | OEM Standard |
manufacturer origin
| Beijing China |
Applicable models | 2018-2020 KIA CEED 2018- KIA CERATO 2016- KIA MORNING 2017- KIA PICANTO 2018- HYUNDAI KONA 2023- HYUNDAI I30 RHD |
.
Installation precautions:
① Confirm that the front wheels are in a straight state;
② Ensure that the connector on the clock spring rotor is in the 6
o'clock or 12 o'clock position, the neutral pin is locked, the ↓↑
mark is aligned, and a single white flat cable can be seen from the
neutral window.
③ The three pins of the clock spring and the combination switch
need to be installed and tightened in place. After assembly, they
should not be loose or easily come off
④ Fix the clock spring pigtail connector buckle in the buckle hole
of the pipe column bracket to ensure it is securely fastened; The
clock spring pigtail wire connector is firmly connected to the wire
harness connector, and a "click" sound is heard. Pull the connector
to check and ensure it is securely inserted
⑤ When assembling the steering wheel, disconnect the neutral pin
according to Figure 14 (S6-5828100 (A) is for pulling out the
neutral pin), and during the assembly process, the clock spring
does not rotate significantly
⑥ After assembling the steering wheel, firmly connect the small
wire of the steering wheel to the clock spring connector. If you
hear a "click" sound, pull the connector to check and ensure it is
securely inserted
⑦ Connect the DAB small wire connector to the DAB and press the
yellow locking buckle to lock it in place
