Genuine New Clock Spring Contact ASSY 93490C5270 for Kia Sorento
2015
The clock spring contact assembly serves the following functions:
Maintains Electrical Connections: It ensures that the electrical
connections to the steering wheel controls, such as the airbag
system, horn, and other switches, remain intact while the steering
wheel is being turned.
Allows for Steering Wheel Movement: The clock spring allows the
steering wheel to turn freely without damaging the electrical
contacts, which are essential for the operation of the vehicle's
safety and convenience features.
If you are looking to replace the clock spring in your 2015 Kia
Sorento, ensure that the part you purchase is the correct one
(93490C5270) and that it is installed by a qualified professional.
This will help ensure the continued safe operation of your vehicle
and compliance with all safety regulations. Always follow the
manufacturer's recommendations and safety procedures when dealing
with vehicle repairs, especially those involving the airbag system.
Applicable vehicle models:
Trade Name
| Clock Spring |
OEM Number
| 93490C5270 93490-C5270 |
Applicable models
| for Kia Sorento 2015 |
Installation precautions:
① Confirm that the front wheels are in a straight state;
② Ensure that the connector on the clock spring rotor is in the 6
o'clock or 12 o'clock position, the neutral pin is locked, the ↓↑
mark is aligned, and a single white flat cable can be seen from the
neutral window.
③ The three pins of the clock spring and the combination switch need
to be installed and tightened in place. After assembly, they should
not be loose or easily come off
④ Fix the clock spring pigtail connector buckle in the buckle hole of
the pipe column bracket to ensure it is securely fastened; The
clock spring pigtail wire connector is firmly connected to the wire
harness connector, and a "click" sound is heard. Pull the connector
to check and ensure it is securely inserted
⑤ When assembling the steering wheel, disconnect the neutral pin
according to Figure 14 (S6-5828100 (A) is for pulling out the
neutral pin), and during the assembly process, the clock spring
does not rotate significantly
⑥ After assembling the steering wheel, firmly connect the small wire
of the steering wheel to the clock spring connector. If you hear a
"click" sound, pull the connector to check and ensure it is
securely inserted
⑦ Connect the DAB small wire connector to the DAB and press the
yellow locking buckle to lock it in place
